Мотор RCX H2205 (V2) 2633KV

This H2205 stands between 1806 and 2206 motor, for those who needs higher thrust than 1806 motor but less weight than 2206. This 2350KV is suitable for both

• 6 inch propeller on 3S
• 5 inch propeller on 3S - 5S

Specification

• Model: H2205-4
• KV: 2633KV
• Weight: Approx. 24-25g (net weight included long AWG cables)
• you can lower the weight if you shorten the long AWG cables.
• AWG Cable: 15cm
• Prop Shaft Diameter: 5mm (CW)
• Stator Diameter: 22mm
• Stator Length: 5mm
• Shaft Diameter: 3mm
• Configuration: 12N14P
• Motor Dimensions: Φ26.6*15.3mm
• ldle Current: 0.86A @ 10V
• Internal Resistance: 0.081Ω
• Suitable ESC: 10-30A (depends on the propeller and battery you use)
• HobbyWing's XRotor works pretty well with H2205 motor so it is recommended especially the XRotor 20A is small in size as small as some 10A-12A ESC.
• Since SimonK and BLHeli might shutter during high RPM on small props (eg. 5030). So if you plan to drive the motor hard, please consider to get XRotor 20A or 40A because XRotor was tested at high RPM without any sync issue.
• Suitable Battery: 3-4S Li-Po
  

Package Included

• 1 x RCX H2205-6 2633KV Micro Outrunner Brushless Motor
• 1 x Hex Locknuts M5 (Slip-Resistant) - CW
• 1 x Circle Plate
• 1 x Set of M3*5 Screw